HOBBYTECH 1/8 RTR Orange Desert Buggy Racer Type SL

HOBBYTECH 1/8 RTR Orange Desert Buggy type SL - HT-SL.DB8.OR

The DB8SL will take you to the terrain you had always dreamed of, this vehicle is a monster of power capable of crossing most obstacles day and night thanks to its LED kit included.

Features:

• New & reinforced swingarms / wishbones
• New rear mud flaps to protect the axles & dampers
• Oil "Race" shock absorber made of aluminum
• Waterproof receiver box
• Despite the scale body and roll cage, changing the battery is lightning fast 
• Powerful 17kg servo with metal gear
• 80Amp waterproof brushless controller by HobbyWing for up to 3S LiPos
• Powerful 2750kv brushless motor with 5mm axle by HobbyWing
• Ultra stable central aluminum drive shaft "Anti Flex"
• Steel sprocket with 30 teeth and 32dpi
• High current resistant Deans / T-plug
• 900mAH charger with balancer function for 2-3S Lipos
• Front & rear differential made of metal
• Middle differential with metal gear
• CNC machined 1cm ultra thick motor mount, adj and secured with 3 screws
• Aluminum CNC machined Ackermann plate
• CNC machined aluminum front & rear shock tower 
• Damper bridges front and rear made of aluminum
• Shock absorbers with protective boats for piston rods
• Stabilizers on the front and rear axles
• Fully ball bearing
• Right / left threaded rods on the compl. suspension
• CCD universal joint drive shafts in front
• 12mm aluminum wheel carrier
• Performance dirt cross devil tires
• LED headlights on the roof
• New 2.4GHz Konect KT2S + remote control incl programmable EPA function
• Aluminum front & rear rammer fenders / skid plates
• Multiple setup options thanks to numerous suspension points
• Lacquered & glued Lexan Cap-Forwad body by BittyDesign Made in Italy
• Operating instructions in German / English / French

Specs:

• Height / Max. : 175 mm
• Wheelbase / Wheelbase: 322 mm
• Front width / Track (front): 306 mm
• Rear width / Track (rear): 310 mm
• Front ride height / Front ground clearance: 54 mm
• Rear ride height / Rear ground clearance: 56 mm
• Weight / Total weight: 2330 gr

Radio Specs

• Servo direction
• reversal ATV potentiometer (dual rate) on channel 1
• TRIM potentiometers
• on channels 1 and 2 Electronic limit switch adjustment on channels 1 and 2
• Weight: 300g
• KT2S + 2 Way Receiver
• Dimensions: 38 × 23.5x14mm
• Weight: 8g

ESC Specs:

• Special for SL type cars Short Course / Truck / Monster truck
• Compatible Sensorless brushless motor
• Power 80A continuous
• Power 520A peak
• Resistance 0.0010 Ω
• Motor limit 5000 Kv in 2S and 3000 Kv in 3S
• Supply 6 to 9 elements in nimh
• Supply 2 to 3S in Lipo (11.1v)
• BEC: 6v-7.4v / 3A
• Dimensions: 49 × 39.5 × 34.7mm
• Weight: 105g Programmable
• Thermal Protection
• via external card (not supplied)
• DEAN connector
• Manufactured by HOBBYWING

Motor Specs:

• Compatible with 10.8V Ni-MH and 2-3S Li-Po
• 2750KV
• Dimensions: Φ = 36mm - L = 60mm
• Axis: Φ = 5mm - L = 18.5mm
• Resistance: 0.0083 Ω
• Poles: 4
• Amp: 2.8A
• Weight: 247 g

**Requires Battery and Charger